This product is shipped directly to you from the manufacturer in Peoria, Illinois. Please note, if this product is large it should be sent to a commercial facility capable of freight docking.
ROHN BPC25G Base Plate for Concrete Pier Tower Placement
The BPC25G uses a 3/4" x 12" pier pin to align the plate to the slab (Separate Item) for Guyed ROHN 25G Tower installations only. This Rohn Base Plate is 15 inches Square and 3/16 Thick, allows the ROHN 25G Tower to be Mounted onto an existing or new Concrete Pier, but Cannot be Used as a Self Supporting Base Plate (see R-25GSSB). This Tower Base uses double bolted joints which are proven to be the best method of joining tower sections for sturdiness and dependability. The 25G tower can be used in guyed, self-supporting or bracketed configurations according to specifications in the ROHN catalog. Consult ROHN Catalog Links at Footer Section below for ROHN 25G Tower Details.
Note
1.FOR USE WITH GUYED AND BRACKETED TOWERS ONLY
2.IT SHALL BE THE CUSTOMER'S OR INSTALLER'S RESPONSIBILITY TO PROVIDE STRUCTURALLY ADEQUATE SUPPORTS FOR PIER & ANCHOR CONNECTIONS.
IT MAY ALSO BE NECESSARY FOR THE CUSTOMER/INSTALLER TO DETERMINE THAT INSTALLATION COMPLIES WITH LOCAL CODES.
The Pier Pin as utilized with this Concrete Base Plate is not really a structural load member, but simply a means of fixating the position of the base Plate as to prevent lateral movement during and after Tower Installation. Consult an Engineer for various substitution options. Hole appearing in corner of plate can be utilized for Ground Rod Location.
Download: ROHN BPC25G Install Sheet
Download: ROHN Warranty Sheet
Download: ROHN 25G Tower Manual